Jewelry Polishing Machine

Plasma jewelry polishing machine is a new type of environmental protection polishing equipment, the operation is very simple, just hang the jewelry product on the hanger, press the start button on the equipment operation panel to complete the product polishing. Jewelry products are all small pieces. The polishing efficiency is mainly related to the size of the surface area of the jewelry itself and the equipment power of the plasma polishing machine. Under the same equipment power, the smaller the surface area of the jewelry, the more the number of polishing, and the larger the surface area of the jewelry. The amount of polishing is less. The efficiency of the plasma jewelry polishing machine is also related to the polishing time. If the surface condition is good, the efficiency will be high if the polishing time is short, and if the surface condition is poor, the efficiency will be low if the polishing time is long. The greater the power of the plasma jewelry polishing equipment, the more the number of each hanging. In a word, the plasma jewelry polishing is related to the power of the equipment, the surface area of the product and the length of polishing time.

The power consumption of a plasma jewelry polisher depends on the power of the machine and how long it has been used.Generally speaking, the power of a plasma jewelry polishing machine is usually between 100 watts and 500 watts, and the duration of use will vary, depending on the material and size of the processed object.For example, for some small jewelry, it usually only takes about ten minutes to use a plasma polishing machine. In this case, the power consumption is usually between a few watts and more than a dozen watts. However, if polishing large metal parts or using multiple tools, the power consumption will increase.Therefore, the specific power consumption is obtained after comprehensive consideration of various factors. If you need to know the specific figures, you can refer to the specifications of the equipment or contact the manufacturer for more detailed information.

Before using the plasma jewelry polishing machine, it is necessary to cut off the burr and the sprue of the jewelry, and repair the jewelry until there are not too many defects. When it comes to plasma polishing, the process is relatively simple. Just do a simple cleaning of the jewelry to ensure that there is no oil stain on the surface of the jewelry. Clamp the jewelry on the hanger, pay attention to clamping, and there should be no looseness. Put the hung jewelry hanger into the plasma jewelry polishing machine, press the start button, the polishing machine will automatically complete the polishing, just wait for a few minutes, and the polishing will be completed.The plasma jewelry polishing machine produced by Bayi is easy to operate, with high output and good quality. It can polish all kinds of jewelry, polish all directions, and have no dead ends.